Automatic Width Adjust PCB Conveyor

Automatic Width Adjust PCB Conveyor

, ,

Automatic Width Adjust PCB Conveyor

1. “Panasonic” PLC control.
2. Leg support is made of 2mm metal material.
3. E-stop is equipped.
4. Rail is special aluminum material.
5. Belt is easy to replace which is easier to maintain.
6. Automatic width adjustment.
7. HMI touch screen.

SKU: LC2023070701 Categories: , ,

Automatic Width Adjust PCB Conveyor

1. “Panasonic” PLC control.
2. Leg support is made of 2mm metal material.
3. E-stop is equipped.
4. Rail is special aluminum material.
5. Belt is easy to replace which is easier to maintain.
6. Automatic width adjustment.
7. HMI touch screen.

Specifications:

Specification HC-350
Power supply AC 220V/ 50/60Hz
PCB size (mm) 400*50~350 (Length~Width)
Transport direction Customize left to right or right to left
Trick fixed side Front side or back side
Transport speed 1-12m/min adjustable
Transport height 900 ± 20 mm
Main motor power 15W
Machine size 600*665*920
Weight (kg) 60

The function of Automatic Width Adjust PCB Conveyor:

The PCB conveyor is used for the connection between SMT production lines, and can also be used for buffering, inspection, testing, or manual insertion of electronic components for PCBs. The PCB conveyor generally includes a frame, two conveyor belts rotating parallel to the frame, and the circuit board placed on the two conveyor belts for transportation. The existing conveyor belts are generally fixed on the frame, so that the two width of the boards conveyed on the conveyor belt is limited, which hinders the conveyance of boards of different sizes, thus making the docking station less suitable.

Precautions:

1. Adjust the machine to a horizontal state before use
2. Before starting up, check whether the power supply is consistent with the specifications of the conveyor (single-phase AC220V/60HZ).
3. If the power supply is unstable, a power regulator must be installed.
4. The machine must be safely grounded, and the ground wire must be well fixed on the fuselage.
5. If the machine is not used for a long time, the power should be cut off.
6. Do not install the machine in dusty, oily, conductive powder, corrosive gas, flammable gas, damp, shock vibration, high temperature, or outdoor environments.

Reviews

There are no reviews yet.

Be the first to review “Automatic Width Adjust PCB Conveyor”

Your email address will not be published. Required fields are marked *

You may also like…

Scroll to Top