Dual Lane PCB Conveyor

Dual Lane PCB Conveyor

, ,

Dual Lane PCB Conveyor.

2. ESD flat belt.
3. “OMRON” sensor.
4. Individual pass button and speed control.
5. Emergency button.
6. Lane 1 fixed, and lane2,3,4 in very low gaps when only using lane 1 and lane 2.

SKU: LC2023070802 Categories: , ,

Dual Lane PCB Conveyor


Specification DL-C-350 – 1.0m
Power supply AC 220V/ 50/60Hz
PCB size (mm) 450*50~250 (Length~Width)
Transport direction Left to right
Trick fixed side 1 fixed, 2,3,4 movable
Transport speed 1-20 m/min adjustable
Transport height 900 ± 20 mm
Main motor power 100W
Machine size 1000*1020*950
Weight (kg) 105

Notes on Dual Lane PCB Conveyor:

Check before power on:
1. Check whether the power supply cable of the connecting station is damaged.
2. Check whether the connection station equipment is well grounded.
3. Check whether the control buttons of the docking station are reset.
4. Check whether the width of the guide rail of the connecting platform is appropriate.
5. Check whether the connecting table belt is loose.
6. If there is no abnormality in the above, it can be turned on and ready for operation.


1. Make sure that there are no objects in the transportation part, belts, pulleys, and transportation guide rails, so as to ensure smooth and smooth transportation.
2. Regularly add oil to the transmission part and the rack or the width-adjusting screw, and the oil must be carried out when the machine is stopped.
3. In case of power failure, turn off the main power switch of the equipment immediately.


There are no reviews yet.

Be the first to review “Dual Lane PCB Conveyor”

Your email address will not be published. Required fields are marked *

You may also like…

Scroll to Top