PCB Component Lead Cutting Machine With Two Workstations AEM-6441 Features:
- Suitable for trimming component leads after soldering on PCB boards, such as power supply boards.
- The equipment automatically trims the leads and automatically collects the trimmed pieces.
- Programmable for use with different boards.
- Lead length can be individually controlled.
- Universal fixture.
- Custom sizes available.
- Square pneumatic cutting pliers.
- The handheld teach pendant interface is simple and easy to use, making operation faster and more convenient.
Operation method: manually place the PCB on the fixture position of the lead cutting machine, and the equipment starts to cut the lead according to the programmed path points (the cut parts are automatically collected by the vacuum device at the same time). When the lead cutting machine completes the pin cutting product, the operator completes the workpiece unloading action and repeats this process.
Structure: Adopts a 3-axis structure; the height can be set arbitrarily, the Z axis can rotate 360 degrees to avoid obstacles, and the vacuum suction device sucks away the waste.
Adopts a square pneumatic cutter, which can process copper lead with a maximum of Ø3mm or less (different diameters require replacement of the cutter), the length of the cutter is adjustable from 0.5 to 5mm, and the precision of the cutter is ±0.2mm.
PCB Component Lead Cutting Machine With Two Workstations AEM-6441 Specifications:
| Specification | 6441 – Two station |
| Machine size | 860*730*920 |
| Move stroke | X:800 mm * Y1: 400mm * Y2: 400mm * Z: 100mm * R: 360° rotate |
| PCB size | Universal fixture 80*80mm— 240*350mm (can customize) |
| PCB thickness | 0.8 – 3 mm |
| PCBA component height | 120 mm |
| PCBA lead recycling | Negative pressure suction container |
| Drive method | Hiwin guide rail + synchronous belt |
| Motor | Yankong closed-loop stepper + drive |
| Power | 750 W 220V |
| Air source | 4 – 6 K G |
| Document point limit | 1000 points |
| Lead length | No limit |
| Lead diameter | Small cutter can cut 0.5-0.8. Big cutter can cut 0.8-1.0mm. Can set two cuts for a lead. A special lead can have a special cutter. |
| Cutter life | 500,000 times |
| Cut speed | About 0.3-0.5 seconds per lead, depending on the distance, direction, and thickness of the lead |








Reviews
There are no reviews yet.