PCB de-stacker Type Loader For SMT

PCB de-stacker Type Loader For SMT

, ,

PCB De-stacker type loader for SMT

  • HMI touchscreen control.
  • Panasonic PLC.
  • Omron sensor.
  • AC motor.
  • Airtek air controller.
  • High-quality cylinder.
  • High-strength aluminum profile.
  • Standard SMEMA.
SKU: DL2023032201 Categories: , ,

PCB de-stacker Type Loader For SMT from SZTech SMT

It can use as a loader or an unloader for bare PCB. Loading the PCB into the PCB de-stacker is very easy. It can save a lot of time for operators to insert the PCB into the PCB magazine.

HMI touchscreen with human-friendly operate surface, no need to click too much on machine settings. Just click automatic mode then the machine will work automatically!

Main specifications of PCB de-stacker

Specification DL-350 DL-460
Power supply AC 220V/ 50/60Hz
Air supply 5 kg f/cm²
PCB size (mm) 535*50~350 530*80~460
PCB transport direction Customize left to right or right to left
Rail fixed side Front side or back side
Storage height 200 mm
Transport speed 6 s per pcs
Transport height 900 ± 20 mm
Main motor power 100W
Machine size 630*810*1250 630*950*1250
Weight (kg) 165 175
Control panel Touch screen

Advantage of PCB de-stacker

  • The structural principle of the SMT PCB de-stacker loader machine: the PCB is supported above the track, the board receiving signal is received from the next machine through the SMEMA, and the blades on both sides of the board are pushed to the board transport belt to send the board out to the next machine.
  • Action process: Manually unpack the PCB and put it into the track. Next, the computer seeks the board. Push the board on both sides of the front and rear rails to the conveyor belt.
  • The belt runs and the board goes out again and again.
  • It can be converted to straight-through mode when the board is passed through the double board (with the same function as the PCB link conveyor).
  • Various non-standard models can be customized according to different sizes of PCBs and the special needs of users.
  • Adapt to various SMT, DIP, or assembly production lines for fully automatic board loading.
  • Using high-performance PLC control, it has the characteristics of stable operation and anti-electromagnetic interference.
  • Human-machine interface, human-machine dialogue is very convenient and simple, and the working status can be monitored by IO.
  • Standard equipment industry standard signal: SMEMA, can be connected with other equipment for online automatic operation, further moving towards smart work with no workers.

Reviews

There are no reviews yet.

Be the first to review “PCB de-stacker Type Loader For SMT”

Your email address will not be published. Required fields are marked *

You may also like…

Scroll to Top