PCB Dual Lane Magazine Unloader For SMT Features:
• Panasonic PLC control with MCGS touch screen.
• SMC cylinder with high performance.
• TBI screw with high accuracy.
• Integrated platform for the elevator system of the PCB magazine.
• VTV motor magazine lift-up-down system.
PCB Dual Lane Magazine Unloader For SMT Specifications:
| Specification | UL-250-DL | UL-330-DL | UL-390-DL | UL-460-DL |
| Power supply | AC 220V/110V 50/60Hz | |||
| Air supply | 5 kg f/cm² | |||
| PCB size (mm) | 330*50~250 | 445*50~330 | 530*50~390 | 535*50~460 |
| Direction | Customize left to right or right to left | |||
| Magazine size (mm) | 355*320*565 | 460*400*565 | 535*460*565 | 535*530*565 |
| Step pitches | 10,20,30,40mm choosable | |||
| Transport height | 900 ± 20 mm | |||
| Main motor power | 500~600 W | |||
| Machine size | 1750*1530*1250 | 1920*1690*1250 | 2160*1820*1250 | 2160*1950*1250 |
| Weight (kg) | 460 | 520 | 580 | 640 |
| Control panel | Touch screen | |||
How to operate the PCB dual lane magazine unloader when changing products?
Press the Manual running, and choose the pitch between two PCBs. Adjust the width of the Magazine to the new PCB width, making sure the PCB can be inserted into the Magazine smoothly. Load a Magazine into the unloader. Press Box input to let the Magazine flow to the lift platform, click clamping, then click lift down. The magazine will lift down to the position where the first board will be unloaded from the rail. Use the rocker to adjust the pusher to be on the center line of the PCB. Can easily push from rail to magazine by hand. Normally the magazine layer is lower than the rail around 1mm. Click the Push plate to check whether the machine can be able to store PCB from the rail into the magazine. Click Exit and then click Automatic running, the machine is getting ready and waiting to send a board signal.
Welcome to contact the sztech-smt team if you need any technical support for the PCB unloader!














Reviews
There are no reviews yet.