PCB Lift Up Down Elevator Conveyor can be used as a vertical reflow of fixtures in wave soldering or coating production lines. It allows the fixtures to return to the same position through the lower assembly or transmission lines. This way, the operator can operate in the same position and continuously receive returned and empty fixtures.
PCB Lift Up Down Elevator Conveyor EC series For Wave Fixture Re-cycle Features:
- Closed design ensures the highest level of safety protection
- You can choose flat belts or stainless steel iron chains. Stainless steel iron chains have a longer service life.
- Using an integrated lifting platform can extend the service life of the equipment.
- AC motor and imported TBI lead screws have high load-bearing and high quality.
- The top safety cover can be opened to facilitate the handling of machine hardware during maintenance.
- Easy-to-use touchscreen function control interface
- The height of the incoming and outgoing boards can be finely adjusted to ensure accurate alignment and transportation of PCB boards.
- Stable and balanced width adjustment device (hand-operated screw rod adjustment)
- Smaller machine footprint
- Compatible SMEMA interface
PCB Lift Up Down Elevator Conveyor EC series For Wave Fixture Re-cycle Specifications:
| Specification | EC-350 | EC-460 |
| Power supply | AC 220V/110V 50/60Hz | |
| Air supply | 5 kg f/cm² | |
| PCB size (mm) | 400*50~350 | 460*50~460 |
| Direction | Customize left to right or right to left | |
| Trick fixed side | Front side or back side | |
| Transport speed | 1-12m/min adjustable | |
| Transport height | 900 ± 20 mm or customize | |
| Main motor power | 180 W | |
| Machine size | 600*700*1150 | 600*810*1150 |
| Weight (kg) | 120 | 160 |












Reviews
There are no reviews yet.