PCB Magazine Loader For SMT

sztech-smt smd PCB Magazine Loader With Cover

PCB Magazine Loader For SMT

, ,
  • AC lift motor.
  • SMC cylinder to push board.
  • Customized height.
  • Panasonic PLC smart control.
  • HMI touchscreen control.
  • Airtek air control.
  • “Omron” sensor.
  • SMEMA on each side.
SKU: LD2023032201 Categories: , ,

PCB Magazine Loader For SMT

  • AC lift motor.
  • SMC cylinder to push board.
  • Customized height.
  • Panasonic PLC smart control.
  • HMI touchscreen control.
  • Airtek air control.
  • “Omron” sensor.
  • SMEMA on each side.

Optional:

  • Multiple magazine sizes for option.
  • Motor type/ cylinder type.
  • Safety cover.
  • CE Certificates.
  • 900 mm height or 950 mm height.
  • Servo control.

Main specifications of PCB Magazine Loader

Specification LD-250 LD-330 LD-390 LD-460
Power supply AC 220V/ 50/60Hz
Air supply 5 kg f/cm²
PCB size (mm) 330*50~250 445*50~330 530*50~390 535*50~460
PCB transport direction Customize left to right or right to left
Magazine size (mm) 335*320*565 460*400*565 535*460*565 535*530*565
Step pitches 10,20,30,40mm choosable
Transport height 900 ± 20 mm
Main motor power 300w
Machine size 1330*765*1250 1650*845*1250 1800*910*1250 1800*970*1250
Weight (kg) 190 210 240 260
Control Touch screen

How to operate the PCB magazine loader when changing products in the SMT line?

Press the Manual running, and choose the pitch between two PCB. Adjust the width of the Magazine to the new PCB width, making sure the PCB can insert into Magazine smoothly. Load a Magazine into the loader. Press Box input to let the Magazine flow to the lift platform, click clamping, then click lift down. The magazine will lift down to the position where the first board will be unloaded from the rail. Use the rocker to adjust the pusher to be on the center line of the PCB. Can easily push from rail to magazine by hand. Normally the magazine layer is lower than the rail around 1mm. Click the Push plate to check whether the machine can be able to store PCB from the rail into the magazine. Click Exit and then click Automatic running, the machine is getting ready and waiting for sending a board signal.

Welcome to contact the sztech-smt team if you need any technical support!

 

 

Reviews

There are no reviews yet.

Be the first to review “PCB Magazine Loader For SMT”

Your email address will not be published. Required fields are marked *

You may also like…

Scroll to Top