PCB Magazine Unloader For SMT

sztech-smt smd PCB L type magazine unloader

PCB Magazine Unloader For SMT

, ,

PCB Magazine Unloader

  • AC lift motor.
  • Customized height.
  • Panasonic PLC smart control.
  • HMI touchscreen control.
  • Airtek air control.
  • “Omron” sensor.
  • SMEMA on each side.
SKU: MU2023032801 Categories: , ,

PCB Magazine Unloader For SMT

  • AC lift motor.
  • Cylinder or motor to push board.
  • Customized height.
  • Panasonic PLC smart control.
  • HMI touchscreen control.
  • Airtek air control.
  • “Omron” sensor.
  • SMEMA on each side.

Optional:

  • Multiple magazine sizes for option.
  • Motor type/ cylinder type.
  • Cover for safety.
  • CE Certificates.
  • 900 mm height or 950 mm height.
  • Servo control.

Main specifications

Specification MU-250 MU-330 MU-390 MU-460
Power supply AC 220V/ 50/60Hz
Air supply 5 kg f/cm²
PCB size (mm) 330*50~250 445*50~330 530*50~390 535*50~460
PCB transport direction Customize left to right or right to left
Magazine size (mm) 335*320*565 460*400*565 535*460*565 535*530*565
Step pitches 10,20,30,40mm choosable
Transport speed 10m/ min
Transport height 900 ± 20 mm or 950 ± 20 mm, customizable.
Main motor power 220W
Machine size 1750*765*1250 1920*845*1250 2160*910*1250 2160*975*1250
Weight (kg) 230 260 290 320
Control panel Touch screen

How to operate the PCB magazine unloader when changing products?

Press the Manual running, and choose the pitch between two PCB. Adjust the width of the Magazine to the new PCB width, making sure the PCB can insert into Magazine smoothly. Load a Magazine into the unloader. Press Box input to let the Magazine flow to the lift platform, click clamping, then click lift down. The magazine will lift down to the position where the first board will be unloaded from the rail. Use the rocker to adjust the pusher to be on the center line of the PCB. Can easily push from rail to magazine by hand. Normally the magazine layer is lower than the rail around 1mm. Click the Push plate to check whether the machine can be able to store PCB from the rail into the magazine. Click Exit and then click Automatic running, the machine is getting ready and waiting for sending a board signal.

Welcome to contact the sztech-smt team if you need any technical support!

Reviews

There are no reviews yet.

Be the first to review “PCB Magazine Unloader For SMT”

Your email address will not be published. Required fields are marked *

You may also like…

Scroll to Top