SMT Machine JUKI RS-1XL chip mounter

SMT Machine JUKI RS-1XL chip mounter

, ,

SMT Machine JUKI RS-1XL chip mounter

  • The optimal loading speed of 42,000CPH* enables high-speed loading
  • Corresponding stress of a wide range of components:
  • Component size 0201*~□74mm also can correspond to 50×150mm. Maximum component height can correspond to 25mm
  • Optimal line balance for the highest throughput
  • Component-equipped identification laser with variable height newly developed “Takumi HEAD”
  • JUKI’s unique laser and visual recognition technology enables high-speed, high-precision parts identification
SKU: SZ2024087881 Categories: , ,

SMT Machine JUKI RS-1XL chip mounter Features:

  • The optimal loading speed of 42,000CPH* enables high-speed loading
  • Corresponding stress of a wide range of components:
  • Component size 0201*~□74mm also can correspond to 50×150mm. Maximum component height can correspond to 25mm
  • Optimal line balance for the highest throughput
  • Component-equipped identification laser with variable height newly developed “Takumi HEAD”
  • JUKI’s unique laser and visual recognition technology enables high-speed, high-precision parts identification

The RS-1XL combines the advantages of the RS-1 and RS-1R with the possibility of assembling printed circuit boards up to 560 mm wide (for comparison RS-1 / RS-1R: max. Width 370 mm). With slightly larger dimensions than an RS-1, the RS-1XL offers the same advantages: fast assembly of the smallest chips (0201 metric) to large components of 50 x 150 mm or 74 mm edge length for square components. The machine combines the properties of a chip shooter with a mounter for large components. There is no need to purchase a special machine type.


SMT Machine JUKI RS-1XL chip mounter Specifications:

Board size max. 650 mm × 560 mm (single clamping)
Component height 25 mm
Component size 0201*2 (metric) ~ 74 mm / 50 × 150 mm
Placement Rate Optimum 42,000 CPH
IPC9850 29,000 CPH
Placement accuracy ± 0.035 mm (Cpk ≥ 1)
Feeder inputs max. 112*2
Power supply 200 ~ 415 VAC, 3-phase
Apparent power 2.2 kVA
Operating air pressure 0.5 ± 0.05 Mpa
Air consumption max. 50 L/min
Machine dimensions(WxDxH) 2,109 × 2,000 × 1,440 mm
Mass(approximately) 1,850 kg
others When using the RF Feeder Series on the front and rear. (Optional)

Reviews

There are no reviews yet.

Be the first to review “SMT Machine JUKI RS-1XL chip mounter”

Your email address will not be published. Required fields are marked *

Scroll to Top