Triple Blade PCB Cutter Machine V-cut MRD-903

Triple Blade PCB Cutter Machine V-cut MRD-903 - knife

Triple Blade PCB Cutter Machine V-cut MRD-903

,

Triple Blade PCB Cutter Machine V-cut MRD-903

The cutting surface is flat and smooth, not twisted or warped.
The upper and lower circular knives can be adjusted accurately, which is easy to operate.
Smooth cutting process and high positioning ability.
Further, increasing production volume and reduces product deformation.

SKU: SZ2024088805 Categories: ,

Triple Blade PCB Cutter Machine V-cut MRD-903 Application:

Segment aluminum substrates, copper substrates, PCB fiberglass boards, FR4, and other substrates with V-CUT grooves.
It is suitable for aluminum substrates, copper substrates, PCB fiberglass boards, SMT circuit boards, FR4, and other substrates with V-CUT slots.


PCB Cutter Machine V-cut MRD-903 Specifications:

Product parameters of three-knife plate splitting machine
machine type MRD-903
Platform size 1500X270X200mm
power supply 220V/50HZ
Power 60W
Circuit board material Aluminum substrate, fiberglass board, copper substrate, etc.
Host size 400x400x330mm
Maximum panel length Unlimited
Depaneling speed 0~300mm/second/s
Board thickness 0.6-3.0mm
Machine weight 40kg

Triple Blade PCB Cutter Machine V-cut MRD-903 Features:

1. Simple operation and fast speed. This machine adopts a unique single V-groove connecting board multi-cutting method. Circuit board cutting is completed by 3 sets of blades. The upper and lower blades form a set to form a cutting unit set. They are A, B, C, and three groups. The entire cutting process is divided into three stages. The A group of blades first cuts 40% of the V-groove part of the circuit board, and then the B-blade runs through the groove cut by the A-blade again, completing 40% of the V-groove part again, and finally, The final 20% is cut and smoothed by the C blade.
2. Since the cutting amount is very small each time, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edges of the divided circuit board are smooth and smooth, and the board surface is very smooth and not twisted or warped. It is currently the only plate-type depaneling machine on the market that can ensure that the substrate will not deform after cutting.
3. Due to multiple cuttings, the cutting process is very smooth, which greatly improves the positioning ability of the V-CUT groove. Even a circuit board with a shallow V-CUT groove will not deform after cutting to avoid defects.

Reviews

There are no reviews yet.

Be the first to review “Triple Blade PCB Cutter Machine V-cut MRD-903”

Your email address will not be published. Required fields are marked *

Scroll to Top