Vacuum Sealing Machine For SMD Parts

Vacuum Sealing Machine For SMD Parts

,

Vacuum Sealing Machine For SMD parts.

  • Stainless steel body.
  • Easy to use.
  • Operational security.
  • Widely used.
  • Stable and efficient.
  • Reliable quality.
  • Powerful motor.
  • Various seal sizes are available.
  • Emergency button.
  • Pure copper transformer.
  • High-quality sealing tape.
  • Inflatable foot switch.
  • Safety switch.
  • Exquisite galvanized material.
SKU: VC2023033101 Categories: ,

Vacuum Sealing Machine For SMD parts from SZTech SMT to store SMD parts in the ESD package with no air conditions.

Main specifications Of Vacuum Sealing Machine:

Power 220V 50Hz 220V 50Hz 220V 50Hz 220V 50Hz
Model SZ-500 SZ-600 SZ-800 SZ-1000
Sealing length 500mm 600mm 800mm 1000mm
Sealing width 8/10 mm 8/10 mm 8/10 mm 8/10 mm
Machine size 600*450*970 700*450*970 900*450*970 1100*450*970
Power 1000W 1500W 1500W 1500W
Weight 60 kg 60 kg 65 kg 65 kg

How to operate the vacuum sealing machine?

1. Turn on the power, and turn on the corresponding function according to the packaging requirements. If it is for suction sealing, turn on the suction function. If it is only sealing, then the machine can be used by default mode.

2. According to the packaging requirements, configure the pumping, inflation, sealing, cooling, and other parameters in sequence (the configuration of each parameter should be effectively configured according to the packaging requirements, we need to pay attention to the sealing time should not be too long, take a single-sided 8-wire vacuum bag as an example, the sealing time can be set to 00.8)

3. Pre-equip the packaging in the packaging bag (if there are sharp corners, please prepare for maintenance work to avoid puncturing the bag due to negative pressure in the bag after vacuuming).

Then place the packaging bag on the sealing strip, and ensure that there is a distance of about 1-2 cm between the air nozzle in the packaging bag and the control valve and the packaging (avoid being too close or too far away to affect the vacuuming effect), and Flatten the mouth of the bag with both hands to avoid the problem of poor sealing and air leakage caused by wrinkles at the mouth of the bag.

4. Step on the foot switch, and the machine can operate according to the pre-configured parameters.

5. After the work is completed, the bead is lifted, and we can take out the packaged materials, and then proceed to the next working cycle.

Reviews

There are no reviews yet.

Be the first to review “Vacuum Sealing Machine For SMD Parts”

Your email address will not be published. Required fields are marked *

Scroll to Top